QUALITY LABORATORY SCOPE
ROUTINE QUALITY LAB TESTS FOR POWDERED METAL PARTS, WITH EQUIPMENT USED
TEST CONDUCTED


1.  Crush Test

2.  Expansion Test

3.  Inside Diameter




4.  Outside Diameter



5.  Density

6.  Weight

7.  Over all height    



                                             
8.  Hardness

9.  Angles


10.  Perpendicularity

11.  Flatness

12.  Length




13.  Width



14.  Torque Test

15.  Microscopic Metallurgical
 Examination of                            
  Micro-Structure
Measuring Device


Vega Machine

Vega Machine

CMM,
3 pt. Micrometers,
Air Gauges,
Calipers

CMM,
Calipers,
Micrometers

Density Machine

Grams Scales

Indicator,
Micrometers,
CMM,
Height Gauge

Rockwell Tester

CMM,
Optical Comparator

CMM

CMM

CMM,
Micrometers,
Calipers,
Height Gauge

CMM,
Micrometers,
Calipers

Torque Wrench and Fixture

Metallography
Range


1-20,000 pounds

1-20,000 pounds

16"X 14"X 12"
1.2 to 1.6
1.000 to 2.550
0-12"

16"X 14"X 12"
0-12"
0-12"



0-8100 grams

0-6"
0-12"
16"X 14"X 12"
0-12"

HRC, HRB, RA

0-360 degrees
0-360 degrees





16"X 14"X 12"
0-12"
0-12"
0-12"

16"X 14"X 12"
0-12"
0-12"

0-250 FT. LBS.
100-800 NM.
Coldwater Sintered Metal Products 300 Race St. Coldwater, Mi 49036 - Phone: 517 278 8750  Fax: 517 781 4631 Contact Us

Types of parts we produce: Powdered Metal parts, Machined Parts, Gears (Bevel Gears, Planetary Gears, Helical Gears, Oil Pump Gears, Sector Gears, Spur
Gears, etc.), Gear Forms, Sprockets, Bearings, Bearing End Caps, Bearing Shields, Bushings, Rollers, Cams, Cam Followers, Racks, Pinions, Spacers, G-Rotors, Pole
Pieces, Soft Magnets, Sensor Rings, Pulse Rings, Impellers, Shaft Couplers, Counterweights, Support Members, Brackets, and any complex, tight tolerance, powdered
metal or machined part.